Common CBN grinding wheels are supplied in resin bond, vitrified bond and metal bond versions, and a further group of CBN abrasives uses an electroplated (single layer, nickel bonded) construction. It is worth stating clearly at the outset: there is no universal ranking of these bond types that applies to every grinding condition. Actual performance also depends on the product formulation, abrasive parameters, working layer structure and the machining conditions in which the wheel is used.
The working layer of a CBN wheel consists of abrasive, bond and the corresponding structure. The CBN abrasive performs the material removal, while the bond is responsible for holding and retaining the abrasive grains and for influencing how those grains are renewed during grinding. Bond selection and working layer structure therefore touch every aspect of wheel behaviour.
| Bond type | Structural character | Typical application direction |
|---|---|---|
| Resin bond | Organic bond with controllable porosity and filler package | General precision grinding, tool room work, dry cutting conditions |
| Vitrified bond | Glass-like ceramic bridge, rigid and thermally stable | Profile grinding, high accuracy and form holding requirements |
| Metal bond | Sintered metal matrix, high grain holding strength | Heavy stock removal, long life, brittle or hard materials |
| Electroplated | Single CBN layer nickel bonded onto a steel or aluminium body | Sharpening, profiling, small features, no dressing required |
The table describes positioning, not a ranking. A resin bond that suits one steel is not automatically inferior to a metal bond in another process.
Because these six factors interact, the same bond system can behave very differently on two machines. When our engineers specify a CBN wheel, four variables are reviewed together:
| Application | Bond direction to evaluate |
|---|---|
| Band saw blade sharpening | Electroplated CBN on steel core, no dressing, form held by the plated layer |
| Tool and cutter grinding | Resin bond for free cutting, vitrified bond for form accuracy |
| Creep feed and heavy stock removal | Metal bond with coarse grit and high concentration |
| Precision profile grinding | Vitrified bond with matched pore structure and dressing strategy |
Before choosing a bond, confirm the workpiece material and hardness, the required surface finish and tolerance, the available machine rigidity and coolant, the acceptable dressing frequency, and the cost per part rather than the unit price of the wheel. A wheel that lasts longer but needs more frequent dressing may cost more per finished part.
Shine Abrasives manufactures CBN and diamond wheels in resin bond, vitrified bond, metal bond and electroplated construction, with diameters from 50mm to 500mm and grit sizes from B46 to B181. Send us your workpiece material, machine model and target cycle time, and we will recommend a bond direction together with a trial wheel. Contact our technical team for a specification review and quotation.
Contact Person: Mr. Lenny Li
Tel: 008615003895611
Fax: 86-371-67129055
Shine Abrasives Diamond Abrasive Grinding Wheels 115mm 11V9 Flaring Cup Shape
D126 75mm Diamond Grinding Wheels For Sharpening Carbide Saw Blades
4A2 5'' Resin Bond Diamond Wheels For Carbide Circular Saw Blade
4.5'' Resin Bond Diamond Grinding Wheels 11V9 Flaring Cup Shape
12'' Vitrified Cbn Grinding Wheel D126 Cylindrical Grinding
1A1 Flat 350mm Vitrified Cbn Grinding Wheel For Steel Grinding
ISO 1A1 Diamond Wheels 500mm Carbides Materials Surface Grinding
Shine Abrasives 1A1 Diamond Wheels For Carbide Sharpening 30''
B126 150mm Cbn Wheel 6 Inch For Lenox Woodturning Grinding
22.2mm Tooth Spacing CBN Sharpening Wheel 8 Inch 203mm
9A1 10 Inch 8 Inch Cbn Grinding Wheel Electroplated Bond Dry Grinding
Radius Edge Cubic Boron Nitride Grinding Wheel For Steel Tools 8 Inch 5/8" Arbor