Diamond and CBN both belong to the family of superabrasives used every day in industrial grinding, and their hardness sits far above conventional abrasives such as aluminium oxide and silicon carbide. That hardness gap is the starting point for everything that follows: higher stock removal per pass, slower wheel wear, and far better dimensional stability on hard and difficult-to-machine materials.
Whatever the abrasive, a superabrasive wheel is assembled from the same functional blocks:
From a construction standpoint the two wheel families therefore have a great deal in common. On the drawing board, a diamond wheel and a CBN wheel of the same size can look almost identical.
The decisive difference in application direction comes first from the abrasive itself. The grain determines what the wheel can cut, how the bond must be designed around it, and which coolant and wheel speed make sense. Everything else - bond selection, core geometry, locating features - is engineering that follows the abrasive choice.
| Wheel Component | Function | What Changes Between Diamond and CBN |
|---|---|---|
| Abrasive grains | Performs the actual cutting | Diamond suits hard brittle non-ferrous and non-metallic work; CBN is the choice for hardened steels and ferrous alloys |
| Bond & working layer | Retains grains and controls self-sharpening | Bond chemistry and grain concentration are matched to the abrasive and the workpiece |
| Core body | Carries the working layer, absorbs load | Material and stiffness selected for the duty cycle and required rigidity |
| Mounting holes, faces, steps | Positioning and balance on the spindle | Geometry customised per machine interface and part tolerance |
Diamond is the harder of the two, but it is not a universal answer. In contact with ferrous material at grinding temperature, diamond is chemically unstable and wears away quickly, which is why CBN dominates hardened steel grinding. CBN, in turn, is not the economical option for carbide, ceramics, glass or other non-ferrous hard materials. Choosing the harder grain is not the goal; choosing the grain that survives the specific workpiece chemistry is.
This is also why bond design cannot be copied across the two families. A bond developed for diamond must protect the grain differently from a bond developed for CBN, and the working-layer structure must be tuned to the self-sharpening behaviour expected in that application.
Diamond and CBN superabrasive wheels share a common architecture - abrasive, bond, core and locating structure - but they are not interchangeable. The abrasive is the first decision, and every other element of the wheel is built to serve it. Buyers who specify workpiece chemistry and machine conditions up front get a wheel that lasts; buyers who specify only dimensions get a wheel that fits.
If you are selecting between diamond and CBN for a new grinding process, our technical team can help match abrasive, bond and core geometry to your workpiece and machine.
Contact Person: Mr. Lenny Li
Tel: 008615003895611
Fax: 86-371-67129055
Shine Abrasives Diamond Abrasive Grinding Wheels 115mm 11V9 Flaring Cup Shape
D126 75mm Diamond Grinding Wheels For Sharpening Carbide Saw Blades
4A2 5'' Resin Bond Diamond Wheels For Carbide Circular Saw Blade
4.5'' Resin Bond Diamond Grinding Wheels 11V9 Flaring Cup Shape
12'' Vitrified Cbn Grinding Wheel D126 Cylindrical Grinding
1A1 Flat 350mm Vitrified Cbn Grinding Wheel For Steel Grinding
ISO 1A1 Diamond Wheels 500mm Carbides Materials Surface Grinding
Shine Abrasives 1A1 Diamond Wheels For Carbide Sharpening 30''
B126 150mm Cbn Wheel 6 Inch For Lenox Woodturning Grinding
22.2mm Tooth Spacing CBN Sharpening Wheel 8 Inch 203mm
9A1 10 Inch 8 Inch Cbn Grinding Wheel Electroplated Bond Dry Grinding
Radius Edge Cubic Boron Nitride Grinding Wheel For Steel Tools 8 Inch 5/8" Arbor