|Place of Origin:
|4V2 1A1 14A2
|Minimum Order Quantity:
|one in paperbox
|5 work days
|1000 PCS in one week
|Diamond Rim Size:
|Coarse To Fine
|T/T, L/C, Western Union, Paypal
20x10mm Rim Electroplated CBN Wheel,
Electroplated CBN Wheel For Knife Grinding
Electroplated CBN Wheel For Knife Grinding And Sharpening Has Excellent Properties
1. First of all, it has a sharp cutting angle that maintains continuous and lasting self-sharpening. Under a certain grinding force,
polycrystalline particles tend to break along the interface between sub-crystals. After the small worn sub-crystals are detached from the crystal particles, new irregular-shaped sub-crystals form sharp edges on the crystal surface. Angle, rather than the entire particle falling off; this process will continue to occur until the particles completely fall off from the binder, so it shows extremely high grinding efficiency and abrasive utilization.
2. Secondly, excellent surface finish. Due to the uniform brittleness, the machined surface will not produce scratches and burn marks.
3. Third, long service life. Due to the presence of rough surfaces and recessed corners and the full use of abrasives, crystal particles are easily grasped by the bonding agent.
4. In addition, the internal stress on the surface of the workpiece being processed is small and the internal stress is evenly distributed, which greatly improves the service life of the workpiece.
Resin-bonded diamond provides high grinding performance and low grinding resistance and is widely used in all dry and wet grinding fields to process hard materials. In most cases, the resin binder system is phenolic resin or polyimide resin. In special cases, specialized lactone binders are also used. The addition of suitable additives will make the resin binder more widely applicable. The best match between resin bond and abrasive is the key to precision grinding, high-finish polishing and high grinding efficiency.
Contact Person: Lenny Li